Satin Smooth Pebble Hard Wax - Titanium Blue 35oz #SSWBMPG

Directions:

1. Prepare the Wax: Pour pebble drops into a metal wax can and heat in a Satin Smooth® or professional wax warmer for 20 to 30 minutes on READY.

2. Check Consistency: Ensure the wax is thick with a center island of unmelted wax; sides should be soft.

3. Test Temperature: Dip an applicator into the wax and apply a small amount to the inside of your wrist. It should cling to the applicator; if it runs off, it’s too hot.

4. Cleanse the Skin : Use Satin Cleanser® to clean the area to be waxed.

5. Apply the Wax: With a new applicator, spread a thin layer of wax against hair growth, then back down, leaving a thicker edge for removal.

6. Allow to Cool: Let the wax harden, then quickly pull the strip against hair growth.

7. Remove Residue: Apply Satin Release® to remove any wax residue, followed by Satin Cool® to soothe the skin.

8. Condition the Skin: Finish with Satin Hydrate® to keep the skin soft.

9. Replenish Wax Can: After service, refill with Satin Smooth® Pebble Wax.

Cautions:

Risk of burns. Do not microwave. Avoid using on irritated, broken skin, or areas with wounds or varicose veins. Always check that skin is dry and irritation-free before use.

Satin Smooth Pebble Hard Wax - Titanium Blue 35Oz #SSWBMPG

Satin Smooth Pebble Hard Wax - Titanium Blue 35Oz #SSWBMPG